Command Line Interfaces For Setup Options - Dell PowerEdge C6220 II Owner's Manual

Option
Save Changes and Exit
Discard Changes and Exit
Save Changes
Discard Changes
Load Optimal Defaults
Load Customized Defaults
Save Customized Defaults

Command Line Interfaces for Setup options

The options of SETUP menu allow the user to control by system
configuration utility (syscfg), the utility includes in Dell OpenManage
Deployment Toolkit (DTK).
Users can use the utility as following:

To change the SETUP option by D4 token:
./syscfg –t=D4_token_id
(Example: ./syscfg -t=0x002D to enable NIC1)

To check token active status:
./syscfg --istokenactive=D4_token_id
(Example: ./syscfg --istokenactive=0x002D to check the token
active status of NIC1)

To change the SETUP option thru BMC memory directly:
./ipmitool raw <command> <data>
(Example: ./ipmitool raw 0xc 1 1 3 10 106 42 120 to set IP address
118 | Using the System Setup Program
Description
Exits system setup after saving the changes. F10 key
can be used for this operation.
Exits system setup without saving any changes. ESC
key can be used for this operation.
Save your changes and without exiting system.
Saves Discards changes.
Loads optimal default values for all the setup
questions.
Loads Customized default values for all the setup
questions.
Saves all setup questions' current values as
Customized default.