ipv6 hop-limit
ipv6 hop-limit
Configures the value placed in the hop limit field in the header of all IPv6 packets that are originated by
the switch. It also configures the value placed in the hop limit field in router advertisements.
ipv6 hop-limit value
no ipv6 hop-limit
Syntax Definitions
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to return the hop limit to its default value.
•
Inputting the value 0 (zero) will result in the default (64) hop-limit.
Examples
-> ipv6 hop-limit 64
Release History
Release 7.1.1; command was introduced.
Related Commands
show ipv6 information
MIB Objects
ipv6MibObjects
Ipv6DefaultHopLimit
page 11-14
Hop limit value. The range is 0 - 255.
default
64
Displays IPv6 information.
OmniSwitch CLI Reference Guide
IPv6 Commands
March 2011