IPv6 Commands
ipv6 route-pref
Configures the route preference of a router.
ipv6 route-pref {static | ospf | rip | ebgp | ibgp} value
Syntax Definitions
static
ospf
rip
ebgp
ibgp
value
Defaults
parameter
static value
ospf value
rip value
ebgp value
ibgp value
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Route preference of local routes cannot be changed.
•
The valid route preference range is 1–255.
•
The IPv6 version of BGP is not supported in the current release.
Examples
-> ipv6 route-pref ospf 20
-> ipv6 route-pref rip 60
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
Configures the route preference of static routes.
Configures the route preference of OSPF3 routes.
Configures the route preference of RIPng routes.
Configures the route preference of external BGP routes.
Configures the route preference of internal BGP routes.
Route preference value.
default
2
110
120
190
200
March 2011
ipv6 route-pref
page 11-23