Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 547

IP Commands
timestamp reply
information request(obsolete)
information reply(obsolete)
address mask request
address mask reply
output definitions
Name
Type
Code
Status
min-pkt-gap
Release History
Release 7.1.1; command introduced
Related Commands
icmp type
icmp unreachable
icmp echo
icmp timestamp
icmp addr-mask
icmp messages
OmniSwitch CLI Reference Guide
14
15
16
17
18
The name of the ICMP message.
The ICMP message type. This along with the ICMP code specify the
kind of ICMP message.
The ICMP message code. This along with the ICMP type specify the
kind of ICMP message.
Whether this message is Enabled or Disabled.
The minimum packet gap, in microseconds, for this ICMP message.
The minimum packet gap is the amount of time that must pass between
ICMP messages of like types.
Enables or disables a specific type of ICMP message, and sets the
minimum packet gap.
Enables or disables ICMP messages pertaining to unreachable des-
tinations, and sets the minimum packet gap.
Enables or disables ICMP echo messages, and sets the minimum
packet gap.
Enables or disables ICMP timestamp messages, and sets the mini-
mum packet gap.
Enables or disables ICMP address mask messages, and sets the
minimum packet gap.
Enables or disables all ICMP messages.
March 2011
0 enabled
0 enabled
0 enabled
0 enabled
0 enabled
show icmp control
0
0
0
0
0
page 10-129