Apply Filter Policies To A Network Ip Interface - Alcatel-Lucent 7210 SAS T Configuration Manual

Common Configuration Tasks

Apply Filter Policies to a Network IP Interface

IP filter policies can be applied to network IP interfaces. MAC filters cannot be applied to network
IP interfaces or to routable IES services.
Apply an IP Interface
CLI Syntax: config>router# interface ip-int-name
The following displays an IP filter applied to an interface at ingress.
A:ALA-48>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
...
...
#------------------------------------------
A:ALA-48>config>router#
Page 278
Guide
interface "to-104"
address 10.0.0.103/24
port 1/1/1
ingress
filter ip 10
exit
egress
filter ip 10
exit
exit
7210 SAS M, T, X, R6, R12, Mxp OS Router Configuration