Create Netlogin Local-User - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Network Login Commands

create netlogin local-user

create netlogin local-user <user-name> {encrypted <password>} {vlan-vsa
[[{tagged | untagged} [<vlan_name>] | <vlan_tag>]]}
Description
Creates a local netlogin user name and password.
Syntax Description
user-name
encrypted
password
tagged
untagged
vlan_name
vlan_tag
Default
N/A.
Usage Guidelines
Use this command to create a local network login account and to configure the switch to use its local
database for network login authentication. This method of authentication is useful in the following
situations:
If both the primary and secondary (if configured) RADIUS servers timeout or are unable to respond
●
to authentication requests.
If no RADIUS servers are configured.
●
If the RADIUS server used for network login authentication is disabled.
●
If any of the above conditions are met, the switch checks for a local user account and attempts to
authenticate against that local account.
Extreme Networks recommends creating a maximum of 64 local accounts. If you need more than 64
local accounts, Extreme Networks recommends using RADIUS for authentication. For more information
about RADIUS authentication, see the ExtremeWare XOS Concepts Guide.
Beginning with ExtremeWare XOS 11.3 you can also specify the destination VLAN to enter upon a
successful authentication.
Additional Requirements. This command applies only to the web-based and MAC-based modes of
network login. 802.1x network login does not support local database authentication.
1072
Specifies a new local netlogin user name. User names must have a minimum
of 1 character and a maximum of 32 characters.
The encrypted option is used by the switch to encrypt the password. Do not
use this option through the command line interface (CLI).
Specifies a local netlogin user password. Passwords must have a minimum of 0
characters and a maximum of 32 characters.
Specifies that the client be added as tagged.
Specifies that the client be added as untagged.
Specifies the name of the destination VLAN.
Specifies the VLAN ID, tag, of the destination VLAN.
ExtremeWare XOS 11.5 Command Reference Guide