Mpls Tunnel-Model - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mpls tunnel-model

mpls tunnel-model { pipe | uniform }
Syntax
no mpls tunnel-model
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies whether MPLS employs the pipe or uniform tunnel model for differentiated
Description
services. The no version restores the default, the pipe model.
Options
Global Configuration
Mode
1414
mpls tunnel-model
pipe-model Specifies that the pipe model is followed
uniform-model Specifies that the uniform model is followed