Creating A Radius Dictionary Based On An Existing Model; Configuring A New Radius Vendor (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide

Creating a RADIUS Dictionary Based on an Existing Model

Configuring a New RADIUS Vendor (NSM Procedure)

78
Table 20: RADIUS Dictionary Configuration Details (continued)
Option Function
Description Describes the RADIUS dictionary.
Dictionary Specifies the dictionary file (.dct) path
on a local or connected drive.
Dictionary filename Specifies the dictionary filename.
To create a RADIUS dictionary based on an existing manufacturer's model:
Modify the existing dictionary.
1.
Select the existing dictionary that you would like to copy. See "Uploading a New
a.
RADIUS Client Dictionary" on page 77.
Download the file, make the required modifications, and then rename and save
b.
the .dct file.
Browse for the file you have modified, and enter a new name and description for the
2.
new dictionary. See "Uploading a New RADIUS Client Dictionary" on page 77.
NOTE: There is no vendor associated with the new dictionary.
Associate the dictionary to a new RADIUS vendor. See "Configuring a New RADIUS
3.
Vendor (NSM Procedure)" on page 78.
To configure a new RADIUS vendor:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to configure a new RADIUS vendor.
Click the Configuration tab. In the configuration tree, select UAC > Network Access
3.
> RADIUS Vendors.
Add or modify RADIUS vendors on the RADIUS Vendors tab as specified in Table 21
4.
on page 79.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
Enter a brief description for the
RADIUS dictionary.
Select the dictionary file.
Enter the filename.
Copyright © 2010, Juniper Networks, Inc.