Mpls Statistics Label - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

mpls statistics label

[ no ] mpls statistics label { interface interfaceName atm vpi vci | labelValue }
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Enables statistics collection for MPLS in labels. By default, statistics are enabled for
Description
in labels depending on the protocol that added the in label to the MPLS forwarding
table. Statistics are not stored in NVS. The no version disables statistics collection.
Options
Global Configuration
Mode
interfaceName Name of interface for label in interface label space on an ATM
AAL5 interface; up to 15 alphanumeric characters
vpi Virtual path identifier for a label, a value in the range 0–255
vci Virtual circuit identifier for a label, a value in the range 33–65535
labelValue Integer identifying a label in the platform label space, a value in the
range 16–1048575
Chapter 13: M Commands
1399
mpls statistics label