Table 27: Show Ip Vrrp Statistics Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SERVICE AVAILABILITY CONFIGURATION GUIDE 2010-10-08 Configuration Manual

Copyright © 2010, Juniper Networks, Inc.

Table 27: show ip vrrp statistics Output Fields

Field Name
Globals
checksumErrors
versionErrors
vrIdErrors
iccErrors
txErrors
rxErrors
Interface
becomeMaster
advertiseRcvd
advertiseIntervalErrors
authFailures
ipTtlErrors
priorityZeroPktsRcvd
priorityZeroPktsSent
invalidTypePktsRcvd
addressListErrors
Field Description
Total number of VRRP packets received with an
invalid VRRP checksum value
Total number of VRRP packets received with an
unknown or unsupported version number
Total number of VRRP packets received with an
invalid VRID for this virtual router
Count of line module notifications that did not make
it to the controller
Count of advertisements that did not get sent due to
resource limitations
Count of advertisements received that could not be
parsed by VRRP applications
Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet
interface specifier and VRID
Total number of times that this VRID state has
transitioned to master
Total number of VRRP advertisements received
Total number of VRRP advertisement packets
received for which the advertisement interval is
different from the one configured for the VRID
Total number of VRRP packets received that do not
pass the authentication check
Total number of VRRP packets received with IP TTL
(time-to-live) not equal to 255
Total number of VRRP packets received with a priority
of 0
Total number of VRRP packets sent with a priority of
0
Total number of VRRP packets received with an
invalid value in the Type field
Total number of VRRP packets received for which the
address list does not match the locally configured list
for the VRID
Chapter 6: Configuring VRRP
165