Figure 64: Configuring Routing Engine Specific Parameters
Viewing a Routing Engine Configuration
Copyright © 2010, Juniper Networks, Inc.
The following example shows how to display the hostname assigned to a specific Routing
Engine. See Figure 65 on page 236 and follow these steps:
In the navigation tree, select Device Manager > Devices.
1.
In the Device Tree, double-click the Junos router with redundant Routing Engines.
2.
In the Info tab of the device editor, select Routing Engine Configuration.
3.
Double-click on the configuration group name to show the configuration for the
4.
corresponding Routing Engine.
In the navigation tree, select System. The configured Routing Engine name appears
5.
in the Host Name field.
Chapter 5: Configuring Devices
235