Monitoring Vpls Configuration And Statistics For All Vpls Instances - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring VPLS Configuration and Statistics for All VPLS Instances

Purpose
Action
614
Table 118: show bridge Output Fields (continued)
Field Name
Port Count
Interface Count
Transport Virtual Rtr
Route Distinguisher
SiteName
SiteId
Multi-homed
Site-Priority
SiteRange
VPLS Route Targets
Flood Next Hop
show bridge
Display configuration and statistics information for all VPLS instances configured on the
router.
To display the names of all VPLS instances configured on the router:
host1#show bridge groups
BridgeGroup: vplsA(vpls)
BridgeGroup: vplsB(vpls)
To display configuration settings for all VPLS instances on the router:
host1#show bridge groups details
Field Description
Number of ports currently configured for the VPLS instance,
including network interfaces and the VPLS virtual core interface
Number of network interfaces currently configured for the VPLS
instance
Name of the transport virtual router configured for the VPLS instance
Unique route distinguisher configured for the VPLS instance
Site name configured for the VPLS instance
Numerical site identifier configured for the VPLS instance
Status of the site. Yes designates a multihomed site. No designates
a site that is not multihomed.
Priority value for the VPLS instance for the multihomed site;
displayed only when the value for the Multi-homed field is Yes
Maximum number of sites that can participate in the VPLS domain
associated with the VPLS instance
Extended community identifiers, also known as route targets, for
each VPLS instance configured on the router
Index of the MPLS next hop to which the router floods packets with
unknown destination addresses. For more information about
displaying MPLS next hops and any available next-hop statistics,
see "Monitoring MPLS Next Hops" on page 355.
Copyright © 2010, Juniper Networks, Inc.