Standard Tools Irbp - ABB IRBP Product Manual

10 Reference information

10.5 Standard tools IRBP

10.5 Standard tools IRBP
General
All service (repairs, maintenance and installation) procedures contain lists of tools
required to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools
that are considered standard are gathered in the Standard toolkit and defined in
the table below.
This way, the tools required are the sum of the Standard toolkit and any tools listed
in the instructions.
Contents, standard toolkit
Qty
1
1
1
1
1
1
1
2
1
1
1
1
312
Tool
Ring-open-end spanner 8-19 mm
Socket head cap 5-17 mm
Torx socket no: 20-60
Box spanner set
Torque wrench 75-400 Nm
Torque wrench 500-1500 Nm
Ratchet head for torque wrench 1/2
Hexagon-headed screw M10x100
Socket head cap no: 14, socket 40 mm bit L 100 mm
Socket head cap no: 14, socket 40 mm bit L 20 mm
Socket head cap no: 6, socket 40 mm bit L 145 mm
Socket head cap no: 6, socket 40 mm bit L 220 mm
© Copyright 2010-2020 ABB. All rights reserved.
Rem.
To be shortened to 12 mm
Product manual - IRBP /D2009
3HAC037731-001 Revision: T