Standard Tools - ABB IRBT 2005 Product Manual

7 Reference information

7.5 Standard tools

7.5 Standard tools
General
All service (repairs, maintenance, and installation) procedures contains lists of
tools required to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools
that are considered standard are gathered in the standard toolkit and defined in
the following table.
This way, the tools required are the sum of the standard toolkit and any tools listed
in the instruction.
Contents, standard tools
Qty
1
1
1
1
1
1
1
1
1
1
276
Tool
Ring-open-end spanner 8-19 mm
Socket head cap 2.5-17 mm
Torx socket no: 20-60
Torque wrench 10-120 Nm
Ratchet head for torque wrench 1/2
Hex bit socket head cap no. 5 socket 1/2", bit length=20 mm
Hex bit socket head cap no. 6 socket 1/2", bit length=20 mm
Hex bit socket head cap no. 8 socket 1/2", bit length=20 mm
Plastic mallet
Small screwdriver
© Copyright 2015 - 2018 ABB. All rights reserved.
Product manual - IRBT 2005
3HAC051130-001 Revision: F