Arp Anti-Attack Source-Mac Exclude-Mac; Arp Anti-Attack Source-Mac Threshold - HP E4510-48G Command Reference Manual

By default, the aging timer for protected MAC addresses is 300 seconds (five minutes).
Examples
# Configure the aging timer for protected MAC addresses as 60 seconds.
<Sysname> system-view
[Sysname] arp anti-attack source-mac aging-time 60

arp anti-attack source-mac exclude-mac

Syntax
arp anti-attack source-mac exclude-mac mac-address&<1-n>
undo arp anti-attack source-mac exclude-mac [ mac-address&<1-n> ]
View
System view
Default Level
2: System level
Parameters
mac-address&<1-n>: MAC address list. The mac-address argument indicates a protected MAC
address in the format H-H-H. &<1-n> indicates the number of protected MAC addresses that you can
configure. The maximum of the n argument is 10.
Description
Use the arp anti-attack source-mac exclude-mac command to configure protected MAC addresses
which will be excluded from ARP packet detection.
Use the undo arp anti-attack source-mac exclude-mac command to remove the configured
protected MAC addresses.
By default, no protected MAC address is configured.
Note that: If no MAC address is specified in the undo arp anti-attack source-mac exclude-mac
command, all the configured protected MAC addresses are removed.
Examples
# Configure a protected MAC address.
<Sysname> system-view
[Sysname] arp anti-attack source-mac exclude-mac 2-2-2

arp anti-attack source-mac threshold

Syntax
arp anti-attack source-mac threshold threshold-value
undo arp anti-attack source-mac threshold
View
System view
4-6