Display Ftp Client Source; Ftp - HP 6125XLG Command Reference Manual

display ftp client source

Use display ftp client source to display the source address settings on the FTP client.
Syntax
display ftp client source
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the source address settings on the FTP client.
<Sysname> display ftp client source
The source IP address of the FTP client is 1.1.1.1.
The source IPv6 address of the FTP client is 2001::1.

ftp

Use ftp to log in to an FTP server and enter FTP client view.
Syntax
ftp [ ftp-server [ service-port ] [ vpn-instance vpn-instance-name ] [ dscp dscp-value | source { interface
interface-type interface-number | ip source-ip-address } ] ] *
Views
User view
Predefined user roles
network-admin
Parameters
ftp-server: Specifies the IPv4 address or host name of an FTP server. A host name can be a
case-insensitive string of 1 to 253 characters. Valid characters for a host name include letters, digits,
hyphens (-), underscores (_), and dots (.).
service-port: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The default
value is 21.
vpn-instance vpn-instance-name: Specifies the VPN instance to which the FTP server belongs. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the FTP server belongs to
the public network, do not specify this option.
dscp dscp-value: Specifies the DSCP value for IPv4 to use in outgoing FTP packets to indicate the packet
transmission priority, in the range of 0 to 63. The default is 0.
source { interface interface-type interface-number | ip source-ip-address }: Specifies the source address
used to establish the FTP connection.
interface interface-type interface-number: Specifies an interface by its type and number. The
•
primary IPv4 address of this interface will be used as the source address for outgoing FTP packets.
90