Display Ftp Client Source; Ftp - HP FlexFabric 12900 series Command Reference Manual

Syntax
disconnect
Views
FTP client view
Predefined user roles
network-admin
Usage guidelines
You can perform this operation only after you log in to the FTP server.
Examples
# Terminate the connection to the FTP server without exiting the FTP client view.
ftp> disconnect
221 Windows FTP Server (WFTPD, by Texas Imperial Software) says goodbye
ftp>
Related commands
close

display ftp client source

Use display ftp client source to display the source address settings on the FTP client.
Syntax
display ftp client source
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the source address settings on the FTP client.
<Sysname> display ftp client source
The source IP address of the FTP client is 1.1.1.1.

ftp

Use ftp to log in to an FTP server and enter FTP client view.
Syntax
ftp [ ftp-server [ service-port ] [ vpn-instance vpn-instance-name ] [ dscp dscp-value | source { interface
interface-type interface-number | ip source-ip-address } ] ] *
Views
User view
86