Disconnect; Display Ftp Client Source; Ftp - HP Enterprise FlexFabric 12900E Series Command Reference Manual

disconnect

Use
disconnect
Syntax
disconnect
Views
FTP client view
Predefined user roles
network-admin
Usage guidelines
You can perform this operation only after you log in to the FTP server.
Examples
# Terminate the connection to the FTP server without exiting the FTP client view.
ftp> disconnect
221-Goodbye. You uploaded 0 and downloaded 0 kbytes.
221 Logout.
ftp>
Related commands
close

display ftp client source

Use
display ftp client source
Syntax
display ftp client source
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the source address settings on the FTP client.
<Sysname> display ftp client source
The source IP address of the FTP client is 1.1.1.1.

ftp

Use to log in to an IPv4 FTP server and enter FTP client view.
ftp
Syntax
ftp [ ftp-server [ service-port ] [ vpn-instance vpn-instance-name ] [ dscp
dscp-value | source { interface interface-type interface-number | ip
source-ip-address } | -d ] * ]
to terminate the connection to the FTP server without exiting FTP client view.
to display the source address settings on the FTP client.
99