Siemens SINUMERIK 840D Diagnostics Manual page 671

03.04
No. 44
Explanation
Not allowed if
Remedy
No. 45
Explanation
Not allowed if
Remedy
No. 46
Explanation
Not allowed if
Remedy
No. 47
Explanation
Not allowed if
Remedy
No. 48
Explanation
Not allowed if
Remedy
No. 49
Explanation
Not allowed if
Remedy
No. 50
Explanation
Not allowed if
Remedy
No. 51
Explanation
Not allowed if
Remedy
No. 52
Explanation
Not allowed if
Remedy
No. 53
Explanation
Not allowed if
Remedy
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
Activate the program (PI command).
-
-
Activate the program, which is still located externally (PI command).
-
-
Activate the program from a different channel (channel communication, NC block: INIT).
-
-
Save definition of an ASUB, which can be activated (PI command).
-
-
Sets all machine data with the attribute (NEW_CONF) to active (PI command).
-
-
Clear all alarms with the clear condition CANCELCLEAR (PI command, Acknowledge
Alarm key).
-
-
Continue search (NC block, Stopre).
-
-
Start search (PI command).
-
-
Continue search (PI command).
-
-
Activate digitizing (PI command).
-
-
1 Alarms
1-671