Siemens SINUMERIK 840D Diagnostics Manual page 61

10.04
6010
Parameters:
Definitions:
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
Channel %1 data block %2 not or not completely created, error code %3
%1 = Channel number
%2 = String (block name)
%3 = Internal error code
Data management has detected an error in power-up. The specified data block may not
have been created. The error number specifies the type of error. If the error number
>100000, then there is a fatal system error. Otherwise, the user memory area was made
too small. In this case the (user) error codes have the following meaning:
• Error number 1: No memory space available
• Error number 2: Maximum possible number of symbols exceeded
• Error number 3: Index 1 outside of valid value range
• Error number 4: Name in channel already exists
• Error number 5: Name in NCK already exists
If the alarm occurs after cycle programs, macro definitions or definitions for global user
data (GUD) have been introduced, the machine data for the NC user memory configura-
tion have been incorrectly configured. In all other cases, changes to machine data that
are already correct lead to errors in the user memory configuration.
The following block names (2nd parameter) are known in the NCK (all system and user
data blocks; in general, only problems in the user data blocks can be remedied by user
intervention:
• _N_NC_OPT - System internal: option data, NCK global
• _N_NC_SEA - System internal: setting data, NCK global
• _N_NC_TEA - System internal: machine data, NCK global
• _N_NC_CEC - System internal: 'cross error compensation'
• _N_NC_PRO - System internal: protection zones, NCK global
• _N_NC_GD1 - User: 1. GUD block defined by _N_SGUD_DEF, NCK global
• _N_NC_GD2 - User: 2. GUD block defined by _N_MGUD_DEF, NCK global
• _N_NC_GD3 - User: 3. GUD block defined by _N_UGUD_DEF, NCK global
• _N_NC_GD4 - User: 4. GUD block defined by _N_GUD4_DEF, NCK global
• _N_NC_GD5 - User: 5. GUD block defined by _N_GUD5_DEF, NCK global
• _N_NC_GD6 - User: 6. GUD block defined by _N_GUD6_DEF, NCK global
• _N_NC_GD7 - User: 7. GUD block defined by _N_GUD7_DEF, NCK global
• _N_NC_GD8 - User: 8. GUD block defined by _N_GUD8_DEF, NCK global
• _N_NC_GD9 - User: 9. GUD block defined by _N_GUD9_DEF, NCK global
• _N_NC_MAC - User: Macro definitions
• _N_NC_FUN - User: Cycle programs
• _N_CHc_OPT - System internal: option data, channel-specific
• _N_CHc_SEA - System internal: setting data, channel-specific
• _N_CHc_TEA - System internal: machine data, channel-specific
• _N_CHc_PRO - System internal: protection zones, channel-specific
• _N_CHc_UFR - System internal: frames, channel-specific
• _N_CHc_RPA - System internal: arithmetic parameter, channel-specific
• _N_CHc_GD1 - User: 1. GUD block defined by _N_SGUD_DEF, channel-specific
• _N_CHc_GD2 - User: 2. GUD block defined by _N_MGUD_DEF, channel-specific
• _N_CHc_GD3 - User: 3. GUD block defined by _N_UGUD_DEF, channel-specific
• _N_CHc_GD4 - User: 4. GUD block defined by _N_GUD4_DEF, channel-specific
• _N_CHc_GD5 - User: 5. GUD block defined by _N_GUD5_DEF, channel-specific
• _N_CHc_GD6 - User: 6. GUD block defined by _N_GUD6_DEF, channel-specific
• _N_CHc_GD7 - User: 7. GUD block defined by _N_GUD7_DEF, channel-specific
• _N_CHc_GD8 - User: 8. GUD block defined by _N_GUD8_DEF, channel-specific
• _N_CHc_GD9 - User: 9. GUD block defined by _N_GUD9_DEF, channel-specific
1 Alarms
1-61