Siemens SINUMERIK 840D Diagnostics Manual page 654

1 Alarms
400145
Definitions:
Reactions:
Remedy:
Program Continuation:
400146
Definitions:
Reactions:
Remedy:
Program Continuation:
400147
Definitions:
Reactions:
Remedy:
Program Continuation:
400148
Definitions:
Reactions:
Remedy:
Program Continuation:
400149
Definitions:
Reactions:
Remedy:
Program Continuation:
400150
Definitions:
Reactions:
Remedy:
Program Continuation:
400151
Definitions:
Reactions:
Remedy:
Program Continuation:
1-654
Delete DB 45 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 46 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 47 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 48 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 49 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 50 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
Delete DB 51 in the PLC and restart
The DB created by the basic program and the existing DB differ in size.
- Alarm display.
Displayed DB must be deleted via STEP7. Possibly max. program size of the user pro-
gram exceeded.
Internal
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
10.04