Siemens SINUMERIK 840D Diagnostics Manual page 489

10.04
101000
Definitions:
Remedy:
Program Continuation:
101001
Definitions:
Remedy:
Program Continuation:
101002
Definitions:
Remedy:
Program Continuation:
101003
Parameters:
Definitions:
Remedy:
Program Continuation:
101004
Parameters:
Definitions:
Remedy:
Program Continuation:
101005
Definitions:
Remedy:
Program Continuation:
101006
Definitions:
Remedy:
Program Continuation:
101007
Definitions:
Remedy:
Program Continuation:
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
No connection to the PLC!
The connection to the PLC cannot be made while booting, e.g. wrong PLC basic program.
--
Internal
The PLC system status list cannot be read!
After the connection has been made, the system status list cannot be read.
Switch controller off/on
Internal
Invalid password!
The password entered is wrong.
Enter a valid password.
Internal
Password for %1 is set!
%1 = Access-level system, manufacturer, service or user.
The password for system, manufacturer, service or user was set successfully.
--
Internal
Password for %1 is set!
%1 = Access-level system, manufacturer, service or user.
The password for system, manufacturer, service or user was changed successfully.
--
Internal
The passwords do not match!
When the password was changed, the password entered first does not match the one
entered second.
Enter a valid password.
Internal
Password is deleted!
The password was deleted via the softkey "Delete password".
Enter password.
Internal
Password is not set!!
To delete the password, a higher access authorization is required (at least user).
Set the password with a higher access level.
Internal
1 Alarms
1-489