Siemens SINUMERIK 840D Diagnostics Manual page 532

1 Alarms
129913
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
129914
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
129915
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
129930
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
129931
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
129932
Parameters:
1-532
%1: Unable to determine machine data
$MN_MM_PROTOC_NUM_ETPD_OEM_LIST[1,10].
%1 = Name of the NCU according to NETNAMES.INI
--
- Alarm display.
Connect to the NCU and restart the PCU if required.
Internal
%1: Unable to determine channel-specific machine data.
%1 = Name of the NCU according to NETNAMES.INI
--
- Alarm display.
Connect to the NCU and restart the PCU if required.
Internal
%1: Unable to determine active user for channel %2.
%1 = Name of the NCU according to NETNAMES.INI
%2 = Channel number
--
- Alarm display.
Connect to the NCU and restart the PCU if required.
Internal
%1: Min. %2 log files are required for the requested time determination
($MN_MM_PROTOC_NUM_FILES[%3])
%1 = Name of the NCU according to NETNAMES.INI
%2 = Number of log files required
%3 = User index
--
- Alarm display.
Set general machine data $MN_MM_PROTOC_NUM_FILES[%3] of NCU %1 to value
%2.
Internal
%1: Min. %2 ETPD lists are required for the requested time determination
($MN_MM_PROTOC_NUM_ETPD_STD_LIST[%3])
%1 = Name of the NCU according to NETNAMES.INI
%2 = Number of ETPD lists required
%3 = User index
--
- Alarm display.
Set general machine data $MN_MM_PROTOC_NUM_ETPD_STD_LIST[%3] of NCU %1
to value %2.
Internal
DAT: The configured NCU (%1) for part program %2 in channel %3 is invalid.
%1 = Name of the NCU according to NETNAMES.INI
%2 = Name of the part program
%3 = Channel number
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
10.04