Siemens SINUMERIK 840D Diagnostics Manual page 531

10.04
Reactions:
Remedy:
Program Continuation:
129907
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
129908
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
129909
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
129910
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
129911
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
129912
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
- Alarm display.
Connect to the NCU and restart the PCU if required.
Internal
%1: The max. number of channels could not be determined.
%1 = Name of the NCU according to NETNAMES.INI
--
- Alarm display.
Connect to the NCU and restart the PCU if required.
Internal
%1: Unable to determine active channels.
%1 = Name of the NCU according to NETNAMES.INI
--
- Alarm display.
Connect to the NCU and restart the PCU if required.
Internal
%1: Unable to determine the name of channel %2.
%1 = Name of the NCU according to NETNAMES.INI
%2 = Channel number
--
- Alarm display.
Connect to the NCU and restart the PCU if required.
Internal
%1: Unable to determine general machine data.
%1 = Name of the NCU according to NETNAMES.INI
--
- Alarm display.
Connect to the NCU and restart the PCU if required.
Internal
%1: Unable to determine machine data $MN_MM_PROTOC_NUM_FILES[1,10].
%1 = Name of the NCU according to NETNAMES.INI
--
- Alarm display.
Connect to the NCU and restart the PCU if required.
Internal
%1: Unable to determine machine data
$MN_MM_PROTOC_NUM_ETPD_STD_LIST[1,10].
%1 = Name of the NCU according to NETNAMES.INI
--
- Alarm display.
Connect to the NCU and restart the PCU if required.
Internal
1 Alarms
1-531