Download Print this page

Siemens SINUMERIK 840Di Operator's Manual

Cad reader manual.
Hide thumbs

Advertisement

SINUMERIK 840D/840Di/810D
Operator's Guide
03.2002 Edition
CAD Reader
User Documentation

Advertisement

Chapters

   Summary of Contents for Siemens SINUMERIK 840Di

  • Page 1

    SINUMERIK 840D/840Di/810D Operator's Guide 03.2002 Edition CAD Reader User Documentation...

  • Page 3

    Control System Software Version SINUMERIK 840D SINUMERIK 840DE (export version) SINUMERIK 840D (powerline) SINUMERIK 840DE (powerline export version) SINUMERIK 840Di SINUMERIK 840DiE (export version) SINUMERIK 810D SINUMERIK 810DE (export version) SINUMERIK 810D (powerline) SINUMERIK 810DE (powerline export version) 03.02 Edition...

  • Page 4

    SIMODRIVE are registered trademarks of Siemens AG. Other names in this publication might be trademarks whose use by a third party for his own purposes may violate the rights of the registered holder. Further information is available at web site: Other functions not described in this documentation might be executable in the http://www.ad.siemens.de/sinumerik...

  • Page 5: Table Of Contents

    Example of Application 4-31 4.1 Example of application for a contour trace ............... 4-32 Appendix A-35 A References .........................A-35 I.1 Keyword Index ........................A-49  Siemens AG, 2002. All rights reserved SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 6: Sinumerik 840d/840di/810d Operator's Guide Cad Reader (cad) – 03.02 Edition

    Contents 03.02 Notes  Siemens AG, 2002. All rights reserved SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 7

    Target systems HMI Advanced or HMI Embedded SW 5.1 and higher ShopMill and ManualTurn SW 5.3 and higher ShopTurn SW 6.2 and higher Please note the supplementary conditions regarding the number of cycles.  Siemens AG, 2002. All rights reserved SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 8

    Differences and additions implemented by the machine-tool manufacturer are documented by the machine-tool manufacturer. Please consult your local Siemens office for more detailed information about other SINUMERIK 840D, 840Di and 810D as well as the publications that apply to all SINUMERIK controls (e.g. Universal Interface, Measuring Cycles ...).

  • Page 9

    For safety reasons, some of the functions are protected from access by unauthorized persons. The machine-tool manufacturer can influence or modify the described functions. Please follow the instructions of the machine-tool manufacturer.  Siemens AG, 2002. All rights reserved SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 10

    Cross-references to other documentation or sections Danger notes Additional notes or background information Ordering data option Explanation Description of syntax Programming examples  Siemens AG, 2002. All rights reserved 0-10 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 11

    This symbol appears whenever specific information can be found in other literature. A complete list of available literature is included in the Appendix of this Operator's Guide.  Siemens AG, 2002. All rights reserved 0-11 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 12

    Principle Your SIEMENS 840D/840Di/810D has been designed and constructed according to state-of-the-art technology and approved safety regulations and standards. The applications of SIEMENS controls can be expanded by adding Additional equipment special additional devices, equipment and expansions supplied by SIEMENS.

  • Page 13

    Improper usage gives rise to unforeseen dangers to: • Life and limb of personnel, • The control, machine or other assets of the owner and the user  Siemens AG, 2002. All rights reserved 0-13 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 14

    Preface 03.02 Rules for proper use Notes  Siemens AG, 2002. All rights reserved 0-14 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 15

    General function ......................1-16 1.2.1 Scope of application....................1-17 1.2.2 Software ........................1-17 1.2.3 Formats ........................1-18 1.2.4 Plane generation ....................... 1-18 © Siemens AG, 2002. All rights reserved 1-15 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 16: The Cad Reader Product

    Existing contours or drill patterns are converted such that they can be interpreted by the geometry processor or the cycles support. © Siemens AG, 2002. All rights reserved 1-16 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 17: Scope Of Application

    Software The software is compatible with operating systems Microsoft Windows 95, Windows 98, Windows Me, Windows NT 4.0 and Microsoft Windows 2000. © Siemens AG, 2002. All rights reserved 1-17 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 18: Formats

    • NC milling programs are created only in the 2D machining plane. The infeed axis must be programmed later. © Siemens AG, 2002. All rights reserved 1-18 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 19: How To Use The Cad Reader

    General operating procedures..................2-20 Define the zero point ...................... 2-21 Contour trace........................2-21 Drill points........................2-23 Manipulate graphic display..................... 2-23 Process an imported file....................2-24  Siemens AG, 2002. All rights reserved 2-19 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 20: General Operating Procedures

    The last action in the contour trace is undone, either element by element or to the last intersection depending on your selection.  Siemens AG, 2002. All rights reserved 2-20 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 21: Define The Zero Point

    Automatically at element center Element Center • Automatically at element start/end point Element Start/End Point • Directly selected with the mouse Mouse Position Example  Siemens AG, 2002. All rights reserved 2-21 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 22

    • when the trace is performed on contours that are already selected • when the contour is attached to files which already contain the label.  Siemens AG, 2002. All rights reserved 2-22 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 23: Drill Points

    "lasso" to select a processing area. Deselect the processing area: You can click this button to deselect the processing area again.  Siemens AG, 2002. All rights reserved 2-23 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 24: Process An Imported File

    It is also possible to select contours that are defined over several layers in a selection box for the contour trace. Layer selections cannot be undone.  Siemens AG, 2002. All rights reserved 2-24 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 25

    • Select button: Activate "Delete geometry area" • Select area: Geometry area is deleted  Siemens AG, 2002. All rights reserved 2-25 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 26

    How to Use the CAD Reader 03.02 2.6 Process an imported file Notes  Siemens AG, 2002. All rights reserved 2-26 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 27: Additional Settings

    03.02 Additional Settings Additional Settings Additional settings and displays ..................3-28  Siemens AG, 2002. All rights reserved 3-27 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 28: Additional Settings And Displays

    Auto Zoom When selection options are chosen for the contour trace, the elements included in the selection are automatically zoomed in each case.  Siemens AG, 2002. All rights reserved 3-28 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 29

    A large capture radius increases the number of possible following elements. Options Input screenform for selecting target systems or displayed plane as well as settings for display and representation.  Siemens AG, 2002. All rights reserved 3-29 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 30

    This document, including the application example, are provided as a help. Miscellaneous You can move the toolbar to any position using the mouse.  Siemens AG, 2002. All rights reserved 3-30 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 31: Example Of Application

    03.02 Example of Application Example of Application Example of application for a contour trace..............4-32  Siemens AG, 2002. All rights reserved 4-31 SINUMERIK 840D/840Di/810D/ Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 32: Example Of Application For A Contour Trace

    Redraw With Redraw you size the selected sub-area of the drawing to match the window and display it again in optimized form.  Siemens AG, 2002. All rights reserved 4-32 SINUMERIK 840D/840Di/810D/ Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 33

    Element center Select the element center and contour trace in direction of arrow.  Siemens AG, 2002. All rights reserved 4-33 SINUMERIK 840D/840Di/810D/ Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 34

    Save the program Save the program as an MPF file. When a program is saved, G code is generated from the selected contour.  Siemens AG, 2002. All rights reserved 4-34 SINUMERIK 840D/840Di/810D/ Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 35: Appendix

    Electronic Documentation /CD1/ The SINUMERIK System DOC ON CD (09.02 Edition) (with all SINUMERIK 840D/840Di/810D and SIMODRIVE publications) Order No.: 6FC5 298-6CA00-0BG3 © Siemens AG, 2002. All rights reserved A-35 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 36

    SINUMERIK 840D/810D Operator's Guide ShopMill (08.02 Edition) Order No.: 6FC5 298-6AD10-0BP1 /BAT/ SINUMERIK 840D/810D Operator's Guide ShopTurn (08.02 Edition) Order No.: 6FC5 298-6AD50-0BP2 © Siemens AG, 2002. All rights reserved A-36 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 37

    Short Guide Programming (02.01 Edition) Order No.: 6FC5 298-6AB30-0BP1 /PGM/ SINUMERIK 840D/840Di/810D Programming Guide ISO Milling (08.02 Edition) Order No.: 6FC5 298-6AC20-0BP2 © Siemens AG, 2002. All rights reserved A-37 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 38: Sinumerik 840di

    Order No.: 6FX2 060-4AA00-4XB0 (Ger., Engl., Fr.) Order from: WK Fürth SINUMERIK 840Di /SYI/ System Overview (02.01 Edition) Order No.: 6FC5 298-6AE40-0BP0 © Siemens AG, 2002. All rights reserved A-38 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 39: Sinumerik 810d

    Order No.: 6FC5 297-6AC10-0BP2 /PMH/ SIMODRIVE Sensor Measuring System for Main Spindle Drives Configuring/Installation Guide, SIMAG-H (HW) (05.99 Edition) Order No.: 6SN1197-0AB30-0BP0 © Siemens AG, 2002. All rights reserved A-39 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 40

    Mode Groups, Channels, Axis Replacement FM-NC Local Bus Kinematic Transformation Measurements Software Cams, Position Switching Signals Punching and Nibbling Positioning Axes Oscillation Rotary Axes © Siemens AG, 2002. All rights reserved A-40 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 41

    DE1 Extended Drive Functions DF1 Enable Commands DG1 Encoder Parameterization DM1 Calculation of Motor/Power Section Parameters and Controller Data DS1 Current Control Loop DÜ1 Monitors/Limitations © Siemens AG, 2002. All rights reserved A-41 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 42

    SINUMERIK 840D/810D /FBH/ HMI Programming Package (10.01 Edition) Order No.: (supplied with software) Part 1 User's Guide Part 2 Description of Functions © Siemens AG, 2002. All rights reserved A-42 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 43

    Description of Functions ShopMill (08.02 Edition) Order No.: 6FC5 297-6AD80-0BP1 /FBST/ SIMATIC Description of Functions FM STEPDRIVE/SIMOSTEP (01.01 Edition) Order No.: 6SN1 197-0AA70-0YP4 © Siemens AG, 2002. All rights reserved A-43 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 44

    Order No.: document is supplied with software /HBA/ SINUMERIK 840D/840Di/810D Manual @Event (01.02 Edition) Order No.: 6AU1900-0CL20-0AA0 /HBI/ SINUMERIK 840Di Manual (09.02 Edition) Order No.: 6FC5 297-6AE60-0BP1 © Siemens AG, 2002. All rights reserved A-44 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 45

    AC Motors for Feed and Main Spindle Drives Order No.: 6SN1 197-0AA20-0BP5 /PJU/ SIMODRIVE 611 Planning Guide Inverters (05.01 Edition) Order No.: 6SN1 197-0AA00-0BP5 © Siemens AG, 2002. All rights reserved A-45 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 46

    Manual: STEP7, Basic Information, V3.1 (03.97 Edition) Order No.: 6ES7 810-4CA02-8AA0 /S7HR/ SIMATIC S7-300 Manual STEP7, Reference Manuals, V3.1 (03.97 Edition) Order No.: 6ES7 810-4CA02-8AR0 © Siemens AG, 2002. All rights reserved A-46 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 47

    Order in conjunction with Configuring Package /SP/ SIMODRIVE 611-A/611-D SimoPro 3.1 Program for Configuring Machine-Tool Drives Order No.: 6SC6 111-6PC00-0BA , Order from: WK Fürth © Siemens AG, 2002. All rights reserved A-47 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 48

    Order No.: 6FC5 297-6AE20-0BP2 Updates/Options Extend the Operator Interface Online Help HMI Embedded Start-Up (PCU 20) HMI Advanced Start-Up (PCU 50) Creating Foreign-Language Texts ▀ © Siemens AG, 2002. All rights reserved A-48 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 49: Keyword Index

    Full circle as contour 2-22 Select processing area 2-23 Full circle as drill hole 2-23 Selection in the event of conflict 2-22 © Siemens AG, 2002. All rights reserved A-49 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 50

    Settings 3-28 Show hatching and dimensions 2-25 Software 1-17 Undo last action in contour trace 2-20 Status line 3-28 Zoom areas 2-24 © Siemens AG, 2002. All rights reserved A-50 SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition...

  • Page 51

    Suggestions Siemens Aktiengesellschaft Corrections A&D MC BMS For publication: P.O. Box 3180 SINUMERIK 840D/840Di/810D D-91050 Erlangen/Germany (Tel. ++49-180-5050-222 [Hotline] Fax ++49-9131-98-2176 User Documentation email: motioncontrol.docu@erlf.siemens.de) From Operator's Guide CAD Reader Order No.: Name Included only in the online help Edition: 03.02...

  • Page 52

    Overview of SINUMERIK 840D/840Di/810D Documentation (03.2002) General Documentation User Documentation SINUMERIK SIROTEC SINUMERIK SINUMERIK SINUMERIK SINUMERIK SINUMERIK SINUMERIK SIMODRIVE 840D/810D 840D/810D/ 840D/840Di/ 840D/840Di/ 840D/840Di/ Accessories 840D/840Di/ FM-NC 810D 810D 810D 810D/ Brochure Catalog Catalog AutoTurn Operator’s Guide *) Operator’s Guide Diagnostics Ordering Info.

This manual also for:

Sinumerik 810d, Sinumerik 840d

Comments to this Manuals

Symbols: 0
Latest comments: