Siemens SINUMERIK 840D Diagnostics Manual page 660

1 Alarms
400902
Definitions:
Reactions:
Remedy:
Program Continuation:
400903
Definitions:
Reactions:
Remedy:
Program Continuation:
401502
Definitions:
Reactions:
Remedy:
Program Continuation:
401602
Definitions:
Reactions:
Remedy:
Program Continuation:
401702
Definitions:
Reactions:
Remedy:
Program Continuation:
401805
Definitions:
Reactions:
Remedy:
Program Continuation:
401901
Definitions:
Reactions:
Remedy:
Program Continuation:
1-660
Parameter ChanNo impermissible in FC 9
The parameterized channel does not exist.
- Alarm display.
Correct the parameter.
Switch control OFF - ON.
Parameter IntNo impermissible in FC 9
The parameterized interrupt does not exist.
- Alarm display.
Correct the parameter.
Switch control OFF - ON.
Impermissible axis no. parameter in FC 15
The parameterized axis does not exist.
- Alarm display.
Correct the parameter.
Switch control OFF - ON.
Impermissible axis no. parameter in FC 16
The parameterized axis does not exist.
- Alarm display.
Correct the parameter.
Switch control OFF - ON.
Impermissible spindle IF no. parameter in FC 17
The parameterized spindle does not exist.
- Alarm display.
Correct the parameter.
Switch control OFF - ON.
Impermissible axis no. parameter in FC 18
The parameterized axis / spindle does not exist.
- Alarm display.
Correct the parameter.
Switch control OFF - ON.
Parameter BAGNo impermissible in FC19
The parameterized mode group, channel does not exist.
- Alarm display.
Correct the parameter.
Switch control OFF - ON.
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
10.04