Omron Q2A Series Technical Manual page 353

Input
Model
Voltage
< 460 V
Rated Output
Capacity
(kVA)
≧ 460 V
< 460 V
Rated Output
Current (A)
≥ 460 V
Outputs
Overload Tolerance
Carrier Frequency
Maximum Output Voltage
Maximum Output Frequency
Measures for
DC Reactor
Harmonics
Braking
Braking Transistor
Device
EMC Filter
EMC Filter
IEC61800-3, C3
Rated Voltage/Rated Frequency
Permitted Voltage Fluctuation
Permitted Frequency Fluctuation
Power Supply
< 460 V
Input Power
(kVA)
≥ 460 V
*1 The maximum applicable motor output complies with 380 V motor ratings as specified in Annex G of IEC 60947-4-1. The rated
output current of the drive output amps must be equal to or more than the motor rated current.
*2 The maximum applicable motor output complies with 460 V motor ratings as specified in NEC Table 430.250. The rated output
current of the drive output amps must be equal to or more than the motor rated current.
*3 Assumes the value at the rated output current. The input current rating changes when the power supply transformer, input reactor,
wiring connections, or power supply impedance change.
*4 The rated output capacity is calculated with a rated output voltage of 380 V.
*5 The rated output capacity is calculated with a rated output voltage of 460 V.
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
Duty Rating 4031
HD 16
*4
ND 20
HD 17
*5
ND 22
HD 24
ND 31
HD 21
ND 27
• HD: 150% of the rated output current for 60 seconds
• ND: 110% of the rated output current for 60 seconds
Note:
Derating may be necessary for applications that start and stop frequently.
HD: 8 kHz without derating the drive capacity.
ND: 2 kHz without derating the drive capacity.
Derate the drive capacity to use values to 15 kHz maximum.
Three-phase 380 V to 480 V
Note:
The maximum output voltage is proportional to the input voltage.
• Advanced Open Loop Vector Control (AOLV) and EZ Open Loop Vector Control (EZOLV): 120 Hz
• Closed Loop V/f Control (CL-V/f), Closed Loop Vector Control (CLV), Advanced Open Loop Vector
Control for PM (AOLV/PM), and Closed Loop Vector Control for PM (CLV/PM): 400 Hz
• V/f Control (V/f), Open Loop Vector Control (OLV), and Open Loop Vector Control for PM (OLV/PM): 590
Hz
External options
Standard internal characteristics
There is a category C3 EMC filter in the drive.
• Three-phase AC power supply 380 V to 480 V at 50/60 Hz
• DC power supply 513 V to 679 V
-15% to +10%
±5%
HD 24
ND 33
HD 21
ND 35
10.2 Model Specifications (400 V Class)
4038 4044 4060
20 26 30
25 29 39
22 27 32
27 32 41
31 39 45
38 44 59.6
27 34 40
34 40 52
Standard internal characteristics
33 40 34
40 48 46
28 35 30
42 50 49
4075 4089 4103
39 49 60
49 59 68
41 52 61
52 61 76
60 75 91
74.9 89.2 103
52 65 77
65 77 96
46 57 69
57 69 84
40 49 59
60 73 88
353
10