Omron Q2A Series Technical Manual page 808

12.10 o: KEYPAD
Enables the automatic shut off function. The time at which the LCD backlight automatically turns off is
configured with o1-38 [LCD Blight Off-Delay].
■
o1-38 LCD Blight Off-Delay
No.
Name
(Hex.)
o1-38 LCD Blight Off-Delay
(11BB)
RUN
When o1-37 = 1 [LCD Blight ON/OFF Selection = ONON], the backlight will automatically turn off after the
time set in o1-38 is expired.
When the backlight is off, push a key on the keypad to temporarily turn the backlight on. After the backlight turns
on, it will turn off automatically after the time set in o1-38 is expired.
■
o1-40 Home Screen Selection Mode
No.
Name
(Hex.)
o1-40 Home Screen Selection
Mode
(11BD)
RUN
0 : Custom Monitors
8 : Bar Graph
9 : Analog Gauge
10 : Trend Plot
■
o1-41 1stMon Area Selection
No.
Name
(Hex.)
o1-41 1stMon Area Selection
(11C1)
RUN
0 : +/- Area (- o1-42 - o1-42 )
1 : + Area (0 - o1-42 )
2 : - Area (- o1-42 - 0)
■
o1-42 1stMon Area Setting
No.
Name
(Hex.)
o1-42 1stMon Area Setting
(11C2)
RUN
■
o1-43 2ndMon Area Selection
No.
Name
(Hex.)
o1-43 2ndMon Area Selection
(11C3)
RUN
0 : + - Area (- o1-44 - o1-44)
1 : + Area (0 - o1-44)
2 : - Area (- o1-44 - 0 )
808
V/f CL-V/f OLV CLV AOLV
Sets the time until the LCD backlight automatically turns off.
V/f CL-V/f OLV CLV AOLV
Sets the monitor display mode for the Home screen. This parameter is only available when using
an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis used to show the monitor that was set in o1-24 [Cust.Monitor 1] as a bar
graph. This parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis value used to display the monitor that was set in o1-24 [Cust.Monitor 1]
as a bar graph. This parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis used to show the monitor that was set in o1-25 as a bar graph. This
parameter is only available with an LCD keypad.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
Default
(Range)
60 s
(10 - 300 s)
Default
(Range)
0
(0, 8 - 10)
Default
(Range)
0
(0 - 1)
Default
(Range)
100.0%
(0.0 - 100.0%)
Default
(Range)
0
(0 - 1)