Omron Q2A Series Technical Manual page 333

1.
Unplug the fan cables from the fan connectors.
A - Fan cable
B - Circuit board cooling fan unit
2.
Loosen the circuit board cooling fan unit screws and slide the circuit board cooling fan unit up.
Note:
To remove the fan unit, it is only necessary to loosen the screws.
A - Screws
3.
Remove the circuit board cooling fan unit.
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
Figure 8.55 Circulation Fan Components
Figure 8.56 Slide the Circuit Board Cooling Fan Unit
Figure 8.57 Remove the Circuit Board Cooling Fan Unit
8.4 Replace a Cooling Fan and Circulation Fan
C - Fan connector
8
333