11.11 O: Keypad; O1: Keypad Display - Omron Q2A Series Technical Manual

11.11 o: KEYPAD

◆

o1: KEYPAD DISPLAY

No.
Name
(Hex.)
o1-02 Mon.Sel@Power-Up
(0501)
RUN
o1-03 FrqDisplay Unit
Selection
(0502)
o1-04 V/f Pattern Unit for
Display
(0503)
o1-05 LCD Contrast
Adjustment
(0504)
RUN
o1-10 FrqDisplay Max Value
(0520)
o1-11 FrqDisplay Decimal
Places
(0521)
o1-24 to o1-35 Cust.Monitor 1 to 12
(11AD - 11B8)
RUN
o1-36 LCD Backlight
Brightness
(11B9)
RUN
o1-37 LCD Blight ON/OFF
Selection
(11BA)
RUN
o1-38 LCD Blight Off-Delay
(11BB)
RUN
o1-40 Home Screen Selection
Mode
(11BD)
RUN
o1-41 1stMon Area Selection
(11C1)
RUN
o1-42 1stMon Area Setting
(11C2)
RUN
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
Description
V/f CL-V/f OLV CLV AOLV
Sets the monitor item that the keypad screen shows after energizing the drive. Refer to
"U: Monitors" for information about the monitor items that the keypad screen can show.
This parameter is only available when using an LED keypad.
1 : FreqReference (U1-01)
2 : Direction
3 : OutFrequency (U1-02)
4 : OutCurrent (U1-03)
5 : User Monitor (o1-01)
V/f CL-V/f OLV CLV AOLV
Sets the display units for the frequency reference and output frequency.
0 : 0.01 Hz
1 : 0.01% (100%=E1-04)
2 : rpm
3 : User-selected units
V/f CL-V/f OLV CLV AOLV
Sets the setting unit for parameters that set the V/f pattern frequency.
0 : Hz
1 : rpm
V/f CL-V/f OLV CLV AOLV
Sets the contrast of the LCD display on the keypad.
V/f CL-V/f OLV CLV AOLV
Sets the value that the drive shows as the maximum output frequency.
V/f CL-V/f OLV CLV AOLV
Sets the number of decimal places for frequency reference and monitor values.
0 : (XXXXX) No Decimal Places
1 : (XXXX.X) 1 Decimal Place
2 : (XXX.XX) 2 Decimal Places
3 : (XX.XXX) 3 Decimal Places
V/f CL-V/f OLV CLV AOLV
Sets a maximum of 12 monitors as user monitors. This parameter is only available with
an LED keypad.
V/f CL-V/f OLV CLV AOLV
Sets the intensity of the LCD keypad backlight.
V/f CL-V/f OLV CLV AOLV
Sets the automatic shut off function for the LCD backlight.
0 : OFF
1 : ON
V/f CL-V/f OLV CLV AOLV
Sets the time until the LCD backlight automatically turns off.
V/f CL-V/f OLV CLV AOLV
Sets the monitor display mode for the Home screen. This parameter is only available
when using an LCD keypad.
0 : Custom Monitors
8 : Bar Graph
9 : Analog Gauge
10 : Trend Plot
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis used to show the monitor that was set in o1-24 [Cust.Monitor 1]
as a bar graph. This parameter is only available with an LCD keypad.
0 : +/- Area (- o1-42 - o1-42 )
1 : + Area (0 - o1-42 )
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis value used to display the monitor that was set in o1-24 [Cust.
Monitor 1] as a bar graph. This parameter is only available with an LCD keypad.
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM

11.11 o: KEYPAD

Default
Ref.
(Range)
1 805
(1 - 5)
Determined by A1-02 805
(0 - 3)
Determined by A1-02 806
(0, 1)
5 806
(0 - 10)
Determined by o1-03 806
(1 - 60000)
Determined by o1-03 807
(0 - 3)
o1-24: 101 807
o1-25: 102
o1-26: 103
o1-27 to o1-35: 0
(0, 101 - 999)
3 807
(1 - 5)
1 807
(0, 1)
60 s 808
(10 - 300 s)
0 808
(0, 8 - 10)
0 808
(0 - 1)
100.0% 808
(0.0 - 100.0%)
463
11