B5: Pid Control - Omron Q2A Series Technical Manual

■
b4-02 Timer OFF Time Delay
No.
Name
(Hex.)
b4-02 Timer OFF Time Delay
(01A4)
■
b4-03 2NO-2CM ON Time Delay
No.
Name
(Hex.)
b4-03 2NO-2CM ON Time Delay
(0B30)
Expert
■
b4-04 2NO-2CM OFF Time Delay
No.
Name
(Hex.)
b4-04 2NO-2CM OFF Time
Delay
(0B31)
Expert
■
b4-05 3NO-3CM ON Time Delay
No.
Name
(Hex.)
b4-05 3NO-3CM ON Time Delay
(0B32)
Expert
■
b4-06 3NO-3CM OFF Time Delay
No.
Name
(Hex.)
b4-06 3NO-3CM OFF Time
Delay
(0B33)
Expert
■
b4-07 4NO-4CM ON Time Delay
No.
Name
(Hex.)
b4-07 4NO-4CM ON Time Delay
(0B34)
Expert
■
b4-08 4NO-4CM OFF Time Delay
No.
Name
(Hex.)
b4-08 4NO-4CM OFF Time
Delay
(0B35)
Expert
◆

b5: PID CONTROL

The drive has a PID control function. You can control drive output to adjust the proportional gain, integral time,
and derivative time that has an effect on the bias between the target value and the feedback value to match the
target value to the detected value. Use this function to adjust the drive output to accurately match the flow,
pressure, and temperature in the application match the target value.
Use a combination of these controls to increase the performance:
• P control
P control has a proportional effect on the deviation. It outputs the product (the controlled output) proportional to
the deviation. You cannot use only the offset from P control to get to zero deviation.
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
V/f CL-V/f OLV CLV AOLV
Sets the OFF-delay time for the timer input.
V/f CL-V/f OLV CLV AOLV
Sets the delay time to activate the contact after the function set in H2-01 activates.
V/f CL-V/f OLV CLV AOLV
Sets the delay time to deactivate the contact after the function set in H2-01 deactivates.
V/f CL-V/f OLV CLV AOLV
Sets the delay time to activate the contact after the function set in H2-02 activates.
V/f CL-V/f OLV CLV AOLV
Sets the delay time to deactivate the contact after the function set in H2-02 deactivates.
V/f CL-V/f OLV CLV AOLV
Sets the delay time to activate the contact after the function set in H2-03 activates.
V/f CL-V/f OLV CLV AOLV
Sets the delay time to deactivate the contact after the function set in H2-03 deactivates.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
12.2 b: APPLICATION
Default
(Range)
0.0 s
(0.0 - 3000.0 s)
Default
(Range)
0 ms
(0 - 65000 ms)
Default
(Range)
0 ms
(0 - 65000 ms)
Default
(Range)
0 ms
(0 - 65000 ms)
Default
(Range)
0 ms
(0 - 65000 ms)
Default
(Range)
0 ms
(0 - 65000 ms)
Default
(Range)
0 ms
(0 - 65000 ms)
539
12