Omron Q2A Series Technical Manual page 661

1 : Auto/Auto
2 : Full/Full
3 : Half/Auto
Port 1 is set to "Half" and port 2 is set to "Auto".
4 : Half/Full
Port 1 is set to "Half" and port 2 is set to "Full".
5 : Auto/Half
Port 1 is set to "Auto" and port 2 is set to "Half".
6 : Auto/Full
Port 1 is set to "Auto" and port 2 is set to "Full".
7 : Full/Half
Port 1 is set to "Full" and port 2 is set to "Half".
8 : Full/Auto
Port 1 is set to "Full" and port 2 is set to "Auto".
■
F7-15 Comm. BaudRate
No.
Name
(Hex.)
F7-15 Comm. BaudRate
(03F3)
10 : 10/10 Mbps
102 : 100/10 Mbps
Note:
Set this parameter when F7-14 = 0 or 2 [Duplex Mode Selection = Half/Half or Full/Full].
■
F7-16 Timeout Value
No.
Name
(Hex.)
F7-16 Timeout Value
(03F4)
Note:
Set this parameter to 0.0 to disable the connection timeout function.
■
F7-17 E/IP Speed Scale Factor
No.
Name
(Hex.)
F7-17 E/IP Speed Scale Factor
(03F5)
■
F7-18 E/IP Current Scale Factor
No.
Name
(Hex.)
F7-18 E/IP Current Scale Factor
(03F6)
■
F7-19 E/IP Torque Scale Factor
No.
Name
(Hex.)
F7-19 E/IP Torque Scale Factor
(03F7)
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
V/f CL-V/f OLV CLV AOLV
Sets the communications speed.
V/f CL-V/f OLV CLV AOLV
Sets the detection time for a communications timeout.
V/f CL-V/f OLV CLV AOLV
Sets the scaling factor for the speed monitor in the EtherNet/IP Class ID 2AH Object.
V/f CL-V/f OLV CLV AOLV
Sets the scaling factor for the output current monitor in the EtherNet/IP Class ID 2AH Object.
V/f CL-V/f OLV CLV AOLV
Sets the scaling factor for the torque monitor in the EtherNet/IP Class ID 2AH Object.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
12.6 F: OPTIONS
Default
(Range)
10
(10, 102)
Default
(Range)
0.0 s
(0.0 - 30.0 s)
Default
(Range)
0
(-15 - +15)
Default
(Range)
0
(-15 - +15)
Default
(Range)
0
(-15 - +15)
12
661