Omron Q2A Series Technical Manual page 316

8.4 Replace a Cooling Fan and Circulation Fan
2.
Pull the cooling fan straight up from the drive. Disconnect the power supply connector and remove the fan
from the drive.
A - Cooling fan
■
Install a Fan
Reverse the removal procedure to install a cooling fan.
1.
Connect the drive and the fan connector.
2.
Align the notches on the fan with the pin on the drive and install the cooling fan in the drive.
A - Notch on fan
B - Alignment pins on drive
Note:
When you install the cooling fan, make sure that you do not pinch cables between the cooling fan and the drive.
316
Figure 8.15 Remove the Cooling Fans
Figure 8.16 Connect the Power Supply Connector
Figure 8.17 Install the Cooling Fan
C - Front of drive
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual