Installation Methods - Omron Q2A Series Technical Manual

2.9

Installation Methods

The drive installation methods include standard installation and external heatsink installation.
◆
Standard Installation
Refer to Drive Exterior and Mounting Dimensions on page 367
and installation procedure.
◆
External Heatsink
An attachment is necessary to install drive models smaller than 4060 (400 V class) with the heatsink outside of the
panel.
Note:
• The exterior mounting dimensions and installation dimensions for a standard installation are different than the dimensions for an
external heatsink installation.
• The shaded parts of the panel cut-out dimensions are the gasket dimensions. Make sure that the gasket is not smaller than the specified
dimension.
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual

2.9 Installation Methods

for more information about external dimensions
2
59