Omron Q2A Series Technical Manual page 320

8.4 Replace a Cooling Fan and Circulation Fan
■
Remove a Fan
1.
To remove the fan finger guard from the drive, push the tabs on the left and right sides of it and pull up the
back side of the guard.
A - Fan finger guard
2.
Pull the cooling fan straight up from the drive. Disconnect the power supply connector and remove the fan
from the drive.
A - Cooling Fan
■
Install a Fan
Reverse the removal procedure to install a cooling fan.
1.
Connect the drive and the fan connector.
320
Figure 8.27 Remove the Fan Finger Guard
Figure 8.28 Remove the Cooling Fan
Figure 8.29 Connect Connector
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual