H4: Analog Outputs - Omron Q2A Series Technical Manual

Setting Function
D GenerTrqLim
E OvUntrq Level
F PID Fbk
10 PID SetPoint
11 Diff PIDFbk
12 AcDcTimeGain
13 DCInjBrakCurr
14 StallPLev@Rn
15 OutFLowLimSel
16 Mot PTC Input
30 Q2pack AI1
31 Q2pack AI1
32 Q2pack AI3
◆

H4: ANALOG OUTPUTS

No.
Name
(Hex.)
H4-01 AO1 An.Out Select
(041D)
H4-02 AO1 An.Out Gain
(041E)
RUN
H4-03 AO1 An.Out Bias
(041F)
RUN
H4-04 AO2 An.Out Select
(0420)
H4-05 AO2 An.Out Gain
(0421)
RUN
H4-06 AO2 An.Out Bias
(0422)
RUN
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
V/f CL-V/f OLV CLV AOLV
Enters the torque limit that is the same for all quadrants for forward, reverse, and regenerative operation if the
motor rated torque is 100%.
V/f CL-V/f OLV CLV AOLV
Enters a signal to adjust the overtorque/undertorque detection level.
Note:
Use this function with L6-01 [Trq Det1 Select]. This parameter functions as an alternative to L6-02 [Trq Det1
Level].
V/f CL-V/f OLV CLV AOLV
Enters the PID feedback value.
V/f CL-V/f OLV CLV AOLV
Enters the PID setpoint.
V/f CL-V/f OLV CLV AOLV
Enters the PID differential feedback value if the full scale analog signal (10 V or 20 mA) is 100%.
V/f CL-V/f OLV CLV AOLV
Enters a signal to adjust the gain used for C1-01 to C1-08 [Accel Time 1 to Decel Time 4] if the full scale analog
signal (10 V or 20 mA) is 100%.
V/f CL-V/f OLV CLV AOLV
Enters a signal to adjust the current level used for DC Injection Braking if the drive rated output current is 100%.
V/f CL-V/f OLV CLV AOLV
Enters a signal to adjust the stall prevention level during run if the drive rated current is 100%.
V/f CL-V/f OLV CLV AOLV
Enters a signal to adjust the output frequency lower limit level if E1-04 [Max Output Frequency] = 100%.
V/f CL-V/f OLV CLV AOLV
Uses the motor Positive Temperature Coefficient (PTC) thermistor to prevent heat damage to the motor if the
current value when the 10 V (or 20 mA) analog signal is input is 100%.
V/f CL-V/f OLV CLV AOLV
Use with Q2pack. Refer to the Q2pack online manual for more information.
V/f CL-V/f OLV CLV AOLV
Use with Q2pack. Refer to the Q2pack online manual for more information.
V/f CL-V/f OLV CLV AOLV
Use with Q2pack. Refer to the Q2pack online manual for more information.
Description
V/f CL-V/f OLV CLV AOLV
Sets the monitor number to send from MFAO terminal AO1.
Set the x-xx part of the U: MONITORS. For example, set H4-01 = 102 to monitor U1-02
[Output Frequency].
V/f CL-V/f OLV CLV AOLV
Sets the gain of the monitor signal that is sent from MFAO terminal AO1.
Sets the analog signal output level from the terminal AO1 at 10 V or 20 mA as 100%
when an output for monitoring items is 100%.
V/f CL-V/f OLV CLV AOLV
Sets the bias of the monitor signal that is sent from MFAO terminal AO1.
Set the level of the analog signal sent from terminal AO1 at 10 V or 20 mA as 100%
when an output for monitoring items is 0%.
V/f CL-V/f OLV CLV AOLV
Sets the monitoring number to be output from the MFAO terminal AO2.
Set the x-xx part of the U: MONITORS. For example, set H4-04 to 102 to monitor U1-
02 [Output Frequency].
V/f CL-V/f OLV CLV AOLV
Sets the gain of the monitor signal that is sent from MFAO terminal AO2.
When an output for monitoring items is 0%, this parameter sets the analog signal output
level from the AO2 terminal at 10 V or 20 mA as 100%.
V/f CL-V/f OLV CLV AOLV
Sets the bias of the monitor signal that is sent from MFAO terminal AO2.
Set the level of the analog signal sent from the AO2 terminal at 10 V or 20 mA as 100%
when an output for monitoring items is 0%.
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
11.8 H: TERMINALS
Ref.
720
720
721
721
721
721
721
722
722
722
722
722
723
Default
Ref.
(Range)
102 724
(000 - 999)
100.0% 724
(-999.9 - +999.9%)
0.0% 725
(-999.9 - +999.9%)
103 725
(000 - 999)
50.0% 725
(-999.9 - +999.9%)
0.0% 725
(-999.9 - +999.9%)
443
11