Omron Q2A Series Technical Manual page 120

4.2 Component Names and Functions
No. Name
STOP Key
G
Left Arrow Key
Up Arrow Key/Down
Arrow Key
/
H
Right Arrow Key (RESET)
ENTER Key
RUN Key
I
J
USB Terminal
K RJ-45 Connector
L Clock Battery Cover
WARNING! Sudden Movement Hazard. The drive may start unexpectedly if switching control sources when setting b1-07 = 2
[LO/RE Run Selection = Accept RUN]. Clear all personnel from rotating machinery and electrical connections prior to switching
control sources. Failure to comply may cause death or serious injury.
◆
LED Flashing Statuses
120
Stops drive operation.
Note:
The STOP key has highest priority. Push
external Run command source. Set o2-02 = 0 [STOP Key Selection of Function = Disabled] to disable the priority in
Moves the cursor to the left.
In the Manual Setup menu, it is possible to navigate MANUAL1 to MANUAL3 menus using the Left and Right keys.
• Scrolls up or down to display the next item or the previous item.
• Selects parameter numbers, and increments or decrements setting values.
• Moves the cursor to the right.
• Continues to the next screen.
• Clears drive faults.
• Enters parameter values and settings.
• Selects menu items to move the user between keypad displays.
• Selects each mode, parameter, and set value.
Starts the drive in LOCAL mode.
Starts the motor tuning procedure in Auto-Tuning Mode.
Note:
Push on the keypad to set the drive to LOCAL Mode before using the keypad to operate the motor.
Insertion point for a mini USB cable. Uses a USB cable (USB standard 2.0, type A - mini-B) to connect the keypad to a PC.
Connects to the drive using an RJ-45 8-pin straight through UTP CAT5e extension cable or keypad connector.
Cover for the customer-supplied clock battery.
Note:
• Make sure to prepare the type CR2016 clock battery with a nominal voltage of 3 V. The clock battery is not supplied as
accessories.
Figure 4.2 LED Flashing Statuses
/
Figure 4.3 Relation between RUN LED and Drive Operation
Function
to stop the motor even when a Run command (REMOTE Mode) is active at any
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
.