Omron Q2A Series Technical Manual page 426

11.7 F: OPTIONS
No.
Name
(Hex.)
F6-50 DNet MAC Address
(03C1)
F6-51 DNet Baud Rate
(03C2)
F6-52 DNet PCA Setting
(03C3)
F6-53 DNet PPA Setting
(03C4)
F6-54 DNet Idle Fault
Detection
(03C5)
F6-55 DNet Baud Monitor
(03C6)
F6-56 DNet Speed Scale Factor
(03D7)
F6-57 DNet Current Scale
Factor
(03D8)
F6-58 DNet Torque Scale
Factor
(03D9)
F6-59 DNet Power Scaling
(03DA)
F6-60 DNet Voltage Scale
(03DB)
F6-61 DNet Time Scale
(03DC)
F6-62 DNet Heartbeat Interval
(03DD)
F6-63 DNet Network MAC ID
(03DE)
F6-64 to F6-67 DynOut.Ass109 P1 to P4
(03DF - 03E2)
F6-68 to F6-71 DynIn.Ass159 P1 to 4
(03E3, 03E4,
03C7, and
03C8)
F6-72 PowerLink Address
(081B)
426
Description
V/f CL-V/f OLV CLV AOLV
Sets the MAC address for DeviceNet communication. Restart the drive after you change
this setting.
Note:
Be sure to set a MAC address that is different than all other node addresses. Do not
set this parameter to 0. Incorrect parameter settings will cause AEr [Station Address
Setting Error] errors and the MS LED on the option will flash.
V/f CL-V/f OLV CLV AOLV
Sets the DeviceNet communications speed. Restart the drive after you change this
setting.
0 : 125 kbps
1 : 250 kbps
2 : 500 kbps
3 : Adjustable from Network
4 : Detect Automatically
V/f CL-V/f OLV CLV AOLV
Sets the format of data that the DeviceNet communication master sends to the drive.
V/f CL-V/f OLV CLV AOLV
Sets the format of data that the drive sends to the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the function to detect EF0 [Option Card External Fault] when the drive does not
receive data from the DeviceNet master.
0 : Enabled
1 : Disabled, No Fault Detection
2 : Vendor Specific
3 : RUN Forward
4 : RUN Reverse
V/f CL-V/f OLV CLV AOLV
Sets the function to see the actual DeviceNet communications speed using the keypad.
This parameter functions as a monitor only.
0 : 125 kbps
1 : 250 kbps
2 : 500 kbps
V/f CL-V/f OLV CLV AOLV
Sets the speed scale for DeviceNet communication.
V/f CL-V/f OLV CLV AOLV
Sets the current scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the torque scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the power scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the voltage scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the time scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the heartbeat for DeviceNet communication. Set this parameter to 0 to disable the
heartbeat function.
V/f CL-V/f OLV CLV AOLV
Sets the function to see the actual DeviceNet MAC address using the keypad. This
parameter functions as a monitor only.
V/f CL-V/f OLV CLV AOLV
Sets Configurable Outputs 1 to 4 written to the Modbus register.
V/f CL-V/f OLV CLV AOLV
Sets Configurable Inputs 1 to 4 written to the Modbus register.
V/f CL-V/f OLV CLV AOLV
Sets the node ID for PowerLink communication.
Note:
Set a node address that is unique. Do not set this parameter to a value of 0.
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
Default
Ref.
(Range)
0 656
(0 - 64)
0 656
(0 - 4)
21 656
(0 - 255)
71 656
(0 - 255)
0 657
(0 - 4)
0 657
(0 - 2)
0 657
(-15 - +15)
0 657
(-15 - +15)
0 657
(-15 - +15)
0 657
(-15 - +15)
0 657
(-15 - +15)
0 658
(-15 - +15)
0 658
(0 - 10)
0 658
(0 - 63)
0000h 658
(0000h - FFFFh)
0000h 658
(0000h - FFFFh)
0 658
(0 - 255)