O2: Keypad Operation - Omron Q2A Series Technical Manual

11.11 o: KEYPAD
No.
Name
(Hex.)
o1-43 2ndMon Area Selection
(11C3)
RUN
o1-44 2ndMon Area Setting
(11C4)
RUN
o1-45 3rdMon Area Selection
(11C5)
RUN
o1-46 3rdMon Area Setting
(11C6)
RUN
o1-47 Trend Plot 1 Min Scale
Value
(11C7)
RUN
o1-48 Trend Plot 1 Max Scale
Value
(11C8)
RUN
o1-49 Trend Plot 2 Min Scale
Value
(11C9)
RUN
o1-50 Trend Plot 2 Max Scale
Value
(11CA)
RUN
o1-51 Trend Plot Time Scale
Setting
(11CB)
RUN
o1-55 AnGauge Area Selection
(11EE)
RUN
o1-56 AnGauge Area Setting
(11EF)
RUN
◆

o2: KEYPAD OPERATION

No.
Name
(Hex.)
o2-01 LO/RE Key Selection of
Function
(0505)
o2-02 STOP Key Selection of
Function
(0506)
o2-03 UserPar Set Default
Values
(0507)
o2-04 Drive KVA Selection
(0508)
464
Description
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis used to show the monitor that was set in o1-25 as a bar graph.
This parameter is only available with an LCD keypad.
0 : + - Area (- o1-44 - o1-44)
1 : + Area (0 - o1-44)
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis value used to display the monitor that was set in o1-25 [Cust.
Monitor 2] as a bar graph. This parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis used to show the monitor that was set in o1-26 as a bar graph.
This parameter is only available with an LCD keypad.
0 : + - Area (- o1-46 - o1-46)
1 : + Area (0 - o1-46 )
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis value used to display the monitor that was set in o1-26 [Cust.
Monitor 3] as a bar graph. This parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the minimum value for the vertical axis used to display the monitor that was set in
o1-24 [Cust.Monitor 1] as a trend plot. This parameter is only available with an LCD
keypad.
V/f CL-V/f OLV CLV AOLV
Sets the maximum value for the vertical axis used to display the monitor that was set in
o1-24 [Cust.Monitor 1] as a trend plot. This parameter is only available with an LCD
keypad.
V/f CL-V/f OLV CLV AOLV
Sets the minimum value for the vertical axis used to display the monitor that was set in
o1-25[Cust.Monitor 2] as a trend plot. This parameter is only available with an LCD
keypad.
V/f CL-V/f OLV CLV AOLV
Sets the maximum value for the vertical axis used to display the monitor that was set in
o1-25 [Cust.Monitor 2] as a trend plot. This parameter is only available with an LCD
keypad.
V/f CL-V/f OLV CLV AOLV
Sets the time scale (horizontal axis) to display the trend plot. When you change this
setting, the drive automatically adjusts the data sampling time. This parameter is only
available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the range used to display the monitor set in o1-24 [Cust.Monitor 1] as an analog
gauge. This parameter is only available with an LCD keypad.
0 : + - Area (- o1-56 - o1-56 )
1 : + Area (0 - o1-56 )
V/f CL-V/f OLV CLV AOLV
Sets the value used to display the monitor set in o1-24 [Cust.Monitor 1] as an analog
meter. This parameter is only available with an LCD keypad.
Description
V/f CL-V/f OLV CLV AOLV
Sets the function that lets the drive switch between LOCAL and REMOTE Modes using
the button.
0 : Disabled
1 : Enabled
V/f CL-V/f OLV CLV AOLV
Sets the function to stop the drive with the
command source for the drive is REMOTE (external) and not assigned to the keypad.
0 : Disabled
1 : Enabled
V/f CL-V/f OLV CLV AOLV
Sets the function to keep the settings of changed parameters as user parameter defaults
to use during initialization.
0 : No change
1 : Set defaults
2 : Clear all
V/f CL-V/f OLV CLV AOLV
Sets the Drive Model code. Set this parameter after replacing the control board.
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
button on the keypad when the Run
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
Default
Ref.
(Range)
0 808
(0 - 1)
100.0% 809
(0.0 - 100.0%)
0 809
(0 - 1)
100.0% 809
(0.0 - 100.0%)
100% 809
(-300 - +300%)
100.0% 809
(-99.9 - +300.0%)
100% 809
(-300 - +300%)
100.0% 809
(-99.9 - +300.0%)
5 s 810
(1 - 3600 s)
1 810
(0, 1)
100.0% 810
(0.0 - 100.0%)
Default
Ref.
(Range)
1 810
(0, 1)
1 811
(0, 1)
0 811
(0 - 2)
Determined by the drive 811
(-)