Backing Up And Transferring Settings Using Memory Card; Saving Settings To The Memory Card - Siemens Sinamics G110M Original Instructions Manual

Data backup and series commissioning

9.1 Backing up and transferring settings using memory card

See also
Backing up and transferring settings using memory card (Page 262)
Saving settings to the memory card (Page 262)
Transferring the settings from the memory card (Page 264)
9.1 Backing up and transferring settings using memory card
What memory cards do we recommend?
You will find the recommended memory cards in section: Commissioning tools (Page 29).
Using memory cards from other manufacturers
The inverter only supports memory cards up to 2 GB. SDHC cards (SD High Capacity) and
SDXC cards (SD Extended Capacity) are not permitted.
If you use other SD or MMC memory cards, then you must format the memory card as
follows:
● MMC: Format FAT 16
– Insert the card into your PC's card reader.
– Command to format the card:
● SD: Format FAT 16 or FAT 32
– Insert the card into your PC's card reader.
– Command to format the card:
Functional restrictions with memory cards from other manufacturers
The following functions are either not possible – or only with some restrictions – when using
memory cards from other manufacturers:
● Licensing functions is only possible using the recommended memory cards.
● Know-how protection is only possible with one of the recommended memory cards.
● Under certain circumstances, memory cards from other manufacturers do not support
writing or reading data from/to the inverter.
9.1.1

Saving settings to the memory card

We recommend that you insert the memory card before switching on the converter for the
first time. The converter then automatically ensures that the actual parameter settings are
saved both in the converter as well as on the card.
262
format x: /fs:fat (x: Drive code of the memory card on your PC)
format x: /fs:fat or format x: /fs:fat32 (x: Drive code of the memory card on your PC.)
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD