Backing Up And Transferring Settings Using Memory Card - Siemens SINAMICS G120 Operating Instructions Manual

Data backup and series commissioning

10.1 Backing up and transferring settings using memory card

10.1 Backing up and transferring settings using memory card
What memory cards do we recommend?
We recommend that you use one of the memory cards with the following order numbers:
● MMC (order number 6SL3254-0AM00-0AA0)
● SD (order number 6ES7954-8LB01-0AA0)
Using memory cards from other manufacturers
If you use other SD or MMC memory cards, then you must format the memory card as
follows:
● MMC: Format FAT 16
● SD: Format FAT 32
248
– Insert the card into your PC's card reader.
– Command to format the card:
format x: /fs:fat (x: Drive code of the memory card on your PC)
– Insert the card into your PC's card reader.
– Command to format the card:
format x: /fs:fat32 (x: Drive code of the memory card on your PC.)
CAUTION
You use memory cards from other manufacturers at your own risk. Depending on the
card manufacturer, not all functions are supported (e.g. download).
SINAMICS G120C frequency converter
Operating Instructions, 03/2012, FW V4.5, A5E02999804B AB