Memory Card Slot - Siemens SINAMICS Series Operating Instructions Manual

Terminal Function
X177_1, X177_2
57, 58, 59, 60 24 V DC
61, 62, 63, 64 M
"Terminal Module Cabinet (TMC)" module
Table 6- 43 Assignment of the terminals on the Cabinet Board (overview)
Terminal Function
X177_5
33, 34 M
35, 36 M
37, 38 RS485: TX+, TX-
39, 40 RS485: RX+, RX-
"Cabinet Board" module
Note:
The terminals on X177_5 are connected in parallel to the terminals with the same name on the Terminal Module Cabinet
(TMC).

Memory card slot

Figure 6-60
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
24 V supply (output)
Ground, digital
Ground, analog
Ground, digital
Send cable +, -
Receive cable +, -
"Control Unit (CUD)" module, memory card slot
6.9 Assignment of terminals and connectors
Description
24 V DC, short-circuit proof
Max. load 200 mA (terminals 9, 10, 57, 58, 59 and
60 combined)
Internal supply to digital ground and analog ground
-
Description
-
See X177.35 and 36
See X177.37 and 38
See X177.39 and 40
Connecting
185