Rear Regulator And Motor Assembly - Subaru Legacy 2004 Service Manual

Hide thumbs Also See for Legacy 2004:

Table of Contents

GLASS/WINDOWS/MIRRORS

12.Rear Regulator and Motor As-

1) Remove the rear door glass. <Ref. to GW-22,

REMOVAL, Rear Door Glass.>

2) Remove the nut (A) to remove front sash.

3) Disconnect the motor connector.

4) Remove the four bolts and two nuts to remove

regulator assembly.

5) Remove the screws to remove motor assembly.

B: INSTALLATION

1) Install in the reverse order of removal.

2) Adjust the rear door glass. <Ref. to GW-23, AD-

JUSTMENT, Rear Door Glass.>

Tightening torque:

Refer to "COMPONENT" of "General Descrip-

tion". <Ref. to GW-5, REAR DOOR GLASS,

COMPONENT, General Description.>

Rear Regulator and Motor Assembly

C: INSPECTION

1) Make sure that the power window motor rotates

properly when the battery voltage is applied to the

terminals of motor connector.

2) Change polarity of battery connection to termi-

nals to ensure that the motor rotates in reverse di-

Table of Contents