Rear Regulator And Motor Assembly - Subaru Legacy 2002 Service Manual

REAR REGULATOR AND MOTOR ASSEMBLY

9. Rear Regulator and Motor
Assembly
S905451
A: REMOVAL
S905451A18
1) Remove door trim. <Ref. to EI-31, REMOVAL,
Rear Door Trim.>
2) Remove sealing cover. <Ref. to EB-17,
REMOVAL, Rear Sealing Cover.>
3) Remove door glass.
REMOVAL, Rear Door Glass.>
4) Secure bolts using screwdriver to remove front
sash adjusting nut.
5) Remove front sash.
6) Disconnect electrical connector.
7) Loosen four bolts and two nuts to remove regu-
lator assembly.
8) Loosen screws to remove motor assembly.
<Ref. to GW-17,
B5M1052
B5M1049
B5M1050
GW-19
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust rear door glass. <Ref. to GW-17,
ADJUSTMENT, Rear Door Glass.>
C: INSPECTION
1) Make sure that power window motor rotates
properly when battery voltage is applied to termi-
nals of motor connector.
2) Change polarity of battery connections to termi-
nals to ensure that motor rotates in reverse direc-
tion.
Glass/Windows/Mirrors
S905451A11
S905451A10