Rear Regulator And Motor Assembly - Subaru Legacy 2003 Service Manual

Hide thumbs Also See for Legacy 2003:

Table of Contents

GLASS/WINDOWS/MIRRORS

9. Rear Regulator and Motor As-

1) Remove door trim. <Ref. to EI-30, REMOVAL,

Front Door Trim.>

2) Remove sealing cover. <Ref. to EB-16, RE-

MOVAL, Rear Sealing Cover.>

3) Remove door glass. <Ref. to GW-17, REMOV-

AL, Rear Door Glass.>

4) Secure bolts using screwdriver to remove front

sash adjusting nut.

5) Remove front sash.

6) Disconnect motor connector.

7) Loosen four bolts and two nuts to remove regu-

lator assembly.

8) Loosen screws to remove motor assembly.

B: INSTALLATION

1) Install in the reverse order of removal.

2) Adjust rear door glass. <Ref. to GW-17, AD-

JUSTMENT, Rear Door Glass.>

REAR REGULATOR AND MOTOR ASSEMBLY

C: INSPECTION

1) Make sure that power window motor rotates

properly when battery voltage is applied to termi-

nals of motor connector.

2) Change polarity of battery connections to termi-

nals to ensure that motor rotates in reverse direc-

Table of Contents