Number Ranges Of Parameters - Siemens SINAMICS G120D CU240D-2 DP Manual

2 Parameters
2.1 Overview of parameters
2.1.2

Number ranges of parameters

Note:
The following number ranges represent an overview for all the parameters available for the
SINAMICS drive family.
The parameters for the product described in this List Manual are described in detail in "List of
parameters" (Page 25).
Parameters are grouped into the following number ranges:
Table 2-6
22
Number ranges for SINAMICS
Range
From To
0000 0099
0100 0199
0200 0299
0300 0399
0400 0499
0500 0599
0600 0699
0700 0799
0800 0839
0840 0879
0880 0899
0900 0999
1000 1199
1200 1299
1300 1399
1400 1799
1800 1899
1900 1999
2000 2009
2010 2099
2100 2139
2140 2199
2200 2359
2360 2399
2500 2699
2700 2719
Display and operation
Commissioning
Power section
Motor
Encoder
Technology and units, motor-specific data, probes
Thermal monitoring, maximum current, operating hours, motor data,
central probe
Control Unit terminals, measuring sockets
CDS, DDS data sets, motor changeover
Sequence control (e.g. signal source for ON/OFF1)
ESR, parking, control and status words
PROFIBUS/PROFIdrive
Setpoint channel (e.g. ramp-function generator)
Functions (e.g. motor holding brake)
U/f control
Closed-loop control
Gating unit
Power unit and motor identification
Reference values
Communication (fieldbus)
Faults and alarms
Signals and monitoring
Technology controller
Staging, hibernation
Position control (LR) and basic positioning (EPOS)
Reference values, display
Description
List Manual (LH14), 01/2016, A5E33842313
SINAMICS G120D