Siemens SINAMICS G120D CU240D-2 DP Manual page 44

2 Parameters
2.2 List of parameters
r0071 Maximum output voltage / U_output max
Access level: 3
Can be changed: -
Unit group: 5_1
Min
- [Vrms]
Description: Displays the maximum output voltage.
Dependency: The maximum output voltage depends on the actual DC link voltage (r0070) and the maximum modulation depth
(p1803).
Note: As the (driven) motor load increases, the maximum output voltage drops as a result of the reduction in DC link
voltage.
r0072 CO: Output voltage / U_output
Access level: 3
Can be changed: -
Unit group: 5_1
Min
- [Vrms]
Description: Display and connector output for the actual output voltage of the power unit.
Dependency: Refer to: r0025
Note: The output voltage is available smoothed (r0025) and unsmoothed (r0072).
r0073 Maximum modulation depth / Modulat_depth max
Access level: 4
Can be changed: -
Unit group: -
Min
- [%]
Description: Displays the maximum modulation depth.
Dependency: Refer to: p1803
r0074 CO: Modulat_depth / Mod_depth
Access level: 4
Can be changed: -
Unit group: -
Min
- [%]
Description: Display and connector output for the actual modulation depth.
Dependency: Refer to: r0028
Note: For space vector modulation, 100% corresponds to the maximum output voltage without overcontrol.
Values above 100 % indicate an overcontrol condition - values below 100% have no overcontrol.
The phase voltage (phase-to-phase, rms) is calculated as follows:(r0074 x r0070) / (sqrt(2) x 100 %).
The modulation depth is available smoothed (r0028) and unsmoothed (r0074).
44
Calculated: -
Scaling: p2001
Unit selection: p0505
Max
- [Vrms]
Calculated: -
Scaling: p2001
Unit selection: p0505
Max
- [Vrms]
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
- [%]
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
- [%]
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 6301, 6640, 6700,
6722, 6723, 6724, 6725, 6727
Factory setting
- [Vrms]
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 5700, 6730, 6731,
6799
Factory setting
- [Vrms]
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 6723, 6724
Factory setting
- [%]
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 5730, 6730, 6731,
6799, 8940, 8950
Factory setting
- [%]
SINAMICS G120D
List Manual (LH14), 01/2016, A5E33842313