Siemens SINAMICS G120D CU240D-2 DP Manual page 549

p20322 NCM 1 run-time group / NCM 1 RTG
CU240D-2_DP Access level: 3
CU240D-2_PN
Can be changed: T
CU240D-2_DP_F
Unit group: -
CU240D-2_PN_F
Min
5
Description: Setting parameter for the run-time group in which the instance NCM 1 of the numeric comparator is to be called.
Value: 5:
6:
9999: Do not calculate
p20323 NCM 1 run sequence / NCM 1 RunSeq
CU240D-2_DP Access level: 3
CU240D-2_PN
Can be changed: T
CU240D-2_DP_F
Unit group: -
CU240D-2_PN_F
Min
0
Description: Setting parameter for the run sequence of instance NCM 1 within the run-time group set in p20322.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20324[0...1] BI: RSR 2 inputs / RSR 2 inputs
CU240D-2_DP Access level: 3
CU240D-2_PN
Can be changed: T
CU240D-2_DP_F
Unit group: -
CU240D-2_PN_F
Min
-
Description: Sets the signal source for set input S and reset input R of instance RSR 2 of the RS flipflop.
Index: [0] = Set S
[1] = Reset R
r20325 BO: RSR 2 output Q / RSR 2 output Q
CU240D-2_DP Access level: 3
CU240D-2_PN
Can be changed: -
CU240D-2_DP_F
Unit group: -
CU240D-2_PN_F
Min
-
Description: Display parameter for output Q of instance RSR 2 of the RS flipflop
r20326 BO: RSR 2 inverted output QN / RSR 2 inv outp QN
CU240D-2_DP Access level: 3
CU240D-2_PN
Can be changed: -
CU240D-2_DP_F
Unit group: -
CU240D-2_PN_F
Min
-
Description: Display parameter for inverted output QN of instance RSR 2 of the RS flipflop.
SINAMICS G120D
List Manual (LH14), 01/2016, A5E33842313
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
2 Parameters
2.2 List of parameters
Data type: Integer16
Dyn. index: -
Func. diagram: 7225
Factory setting
9999
Data type: Unsigned16
Dyn. index: -
Func. diagram: 7225
Factory setting
830
Data type: U32 / Binary
Dyn. index: -
Func. diagram: 7240
Factory setting
0
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7240
Factory setting
-
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7240
Factory setting
-
549