Siemens SINAMICS G120D CU240D-2 DP Manual page 377

r2672 CO: EPOS actual velocity setpoint / v_set act
CU250D-2_PN_F Access level: 1
CU250D-2_DP_F
Can be changed: -
Unit group: -
Min
- [1000 LU/min]
Description: Displays the velocity setpoint presently being processed.
r2673 CO: EPOS actual acceleration override / a_over act
CU250D-2_PN_F Access level: 1
CU250D-2_DP_F
Can be changed: -
Unit group: -
Min
- [%]
Description: Displays the acceleration override presently being processed.
Note: An override of 100% is effective in the "jogging" and "search for reference" operating modes.
r2674 CO: EPOS actual deceleration override / -a_over act
CU250D-2_PN_F Access level: 1
CU250D-2_DP_F
Can be changed: -
Unit group: -
Min
- [%]
Description: Displays the deceleration override presently being processed.
Note: An override of 100% is effective in the "jogging" and "search for reference" operating modes.
r2675 CO: EPOS actual task / Task act
CU250D-2_PN_F Access level: 1
CU250D-2_DP_F
Can be changed: -
Unit group: -
Min
0
Description: Displays the task that is presently being processed.
Value: 0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
Dependency: Refer to: p2621
SINAMICS G120D
List Manual (LH14), 01/2016, A5E33842313
Inactive
POSITIONING
FIXED STOP
ENDLESS_POS
ENDLESS_NEG
WAITING
GOTO
SET_O
RESET_O
JERK
Calculated: -
Scaling: -
Unit selection: -
Max
- [1000 LU/min]
Calculated: -
Scaling: -
Unit selection: -
Max
- [%]
Calculated: -
Scaling: -
Unit selection: -
Max
- [%]
Calculated: -
Scaling: -
Unit selection: -
Max
9
2 Parameters
2.2 List of parameters
Data type: Integer32
Dyn. index: -
Func. diagram: 3610, 3612, 3616,
3620
Factory setting
- [1000 LU/min]
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 3610, 3612, 3616,
3620
Factory setting
- [%]
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 3610, 3612, 3616,
3620
Factory setting
- [%]
Data type: Integer16
Dyn. index: -
Func. diagram: 3616
Factory setting
-
377