Siemens SINAMICS G120D CU240D-2 DP Manual page 415

r5398[0...n] Mot_temp_mod 3 alarm threshold image p5390 / A thr image p5390
Access level: 2
Can be changed: -
Unit group: 21_1
Min
- [°C]
Description: Displays the alarm threshold for monitoring the motor temperature for motor temperature model 3.
This value is used to calculate the utilization display (p0034).
The parameter value is an image of p5390.
Dependency: Refer to: p5390
Refer to: F07011, A07012, A07014
Note: Users cannot see and change parameter p5390 (only Siemens internal).
r5399[0...n] Mot_temp_mod 3 fault threshold image p5391 / F thr image p5391
Access level: 2
Can be changed: -
Unit group: 21_1
Min
- [°C]
Description: Sets the fault threshold for monitoring the motor temperature for motor temperature model 3.
Fault F07011 is output after the fault threshold is exceeded.
The parameter value is an image of p5391.
Dependency: Refer to: p5391
Refer to: F07011, A07012, A07014
Note: Users cannot see and change parameter p5391 (only Siemens internal).
r5600 Pe energy-saving mode ID / Pe mode ID
CU240D-2_PN Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Unit group: -
Min
0
Description: Displays the PROFIenergy mode ID of the effective energy-saving mode.
Value: 0:
1:
240:
255:
Note: Pe: PROFIenergy profiles
p5602[0...1] Pe energy-saving mode pause time minimal / Pe mod t_pause min
CU240D-2_PN Access level: 3
CU240D-2_PN_F
Can be changed: T
CU250D-2_PN_F
Unit group: -
Min
300000 [ms]
Description: Sets the minimum possible pause time for the energy-saving mode.
The value is the sum of the following times:
- Energy-saving mode transition time
- Operating state transition time regular
- Energy-saving mode, time of minimum stay
Index: [0] = Mode 1
[1] = Reserved
SINAMICS G120D
List Manual (LH14), 01/2016, A5E33842313
POWER OFF
Energy-saving mode 1
Operation
Ready
Calculated: -
Scaling: -
Unit selection: p0505
Max
- [°C]
Calculated: -
Scaling: -
Unit selection: p0505
Max
- [°C]
Calculated: -
Scaling: -
Unit selection: -
Max
255
Calculated: -
Scaling: -
Unit selection: -
Max
4294967295 [ms]
2 Parameters
2.2 List of parameters
Data type: FloatingPoint32
Dyn. index: MDS
Func. diagram: 8019
Factory setting
- [°C]
Data type: FloatingPoint32
Dyn. index: MDS
Func. diagram: 8019
Factory setting
- [°C]
Data type: Integer16
Dyn. index: -
Func. diagram: 2381, 2382
Factory setting
-
Data type: Unsigned32
Dyn. index: -
Func. diagram: 2381
Factory setting
[0] 300000 [ms]
[1] 480000 [ms]
415